Interference and Intentional Jamming could leave you with inaccurate survey results at best or empty handed at worse when your UAV/drone gets confused and vanishes.
The best results are achieved by using the best equipment:
AsteRx m2
Designed for straightforward integration into UAVs. The AsteRx-m2 features AIM+, the most advanced on-board interference mitigation technology on the market.
Covering multi constellations and multi frequencies, the AsteRx m2 can suppress the widest variety of interferers, from simple continuous narrowband signals to the most complex wideband and pulsed jammers. The RF spectrum can be viewed in real-time in both time and frequency domains. Uninterrupted cm accuracy from Septentrio.
TW1829
Specifically designed for use in UAVs, the TW1829 from Tallysman is a light weight (37g) compact GPS L1/L2 + GLONASS G1/G2 antenna.
The TW1829 is Designed using Tallysman’s Accutenna® technology, which has proven its ability to provide high level rejection of multipath signals, a phase linear response, and tight Phase Centre Variations (PCV)
M1227HCT-A2-SMA
The M1227HCT-A2-SMA is a very high performance rugged antenna designed to receive GNSS signals in many different orientations such as those experienced during different manoeuvres of a UAV.
NV08C-RTK-M
The NV08C-RTK-M receiver is specifically designed for use in high accuracy applications, demanding low cost, low power consumption, small form factor and uncompromised performance.
The NV08C-RTK-M improved dual frequency RTK positioning utilises GPS L1/L2, GLONASS G1/G2, and Beidou B1/B2 GNSS Receiver with Galileo E1 and SBAS. Specifically designed for use in highly accurate applications, especially Unmanned Aerial Vehicles (UAVs)
NV08C-RTK-A
The NV08C-RTK-A is a Single Frequency GPS L1 GLONASS G1 receiver, with Dual Antenna Supporting, RTK Positioning, Heading + Pitch/Roll designed for Unmanned Aerial Vehicles (UAVs).