Emlid RCH203-KIT Reach RS2 Survey Kit with Extension Pole

From: £3,183.00 Each Ex-VAT (EXW)

Emlid RCH203-KIT Reach RS2 Survey Kit. Two Reach RS2 receivers, with extension pole for surveying in RTK and PPK modes

An affordable Multi-band GNSS receiver which uses an app as a controller. Reach RS2 is designed for Precise surverying, mapping and data collection with cm accuracy. For use in RTK mode without the need for NTRIP corrections.

Product Quantity

1 in stock (can be backordered)

1
1
1
1
1

Available on backorder

Enquire Now

Product Documents

Emlid RCH203-KIT Reach RS2 Survey Kit. Two Reach RS2 receivers, with extension pole for surveying in RTK and PPK modes, with one set as GNSS RTK Rover and the other set as GNSS RTK Base.

An affordable Multi-band GNSS receiver which uses an app as a controller.

Reach RS2 is designed for Precise surverying, mapping and data collection with cm accuracy. For use in RTK mode without the need for NTRIP corrections.

Emlid RCH203 Reach RS2 Multi-band RTK GNSS Receiver Features:
Collect Survey Points
Use as Base Station for Surveying / Data Collection
Receive Corrections Data via the Internet
Machinery Guidance
CM Accuracy in RTK Mode (Reach RS+ Survey Kit RCH202-KIT Required)
Reachview App
Gets Fix in Seconds
Centimeter Accuracy
RTK over 60km
PPK over 100km
Built in 3.5G Modem
PPP Support

Products included in Emlid RCH203 Package:
Reach RS2
Carry case with a strap
Radio antenna
USB Type-C cable

Includes Reach RS2 Extension Pole x 1

Centimeter Accuracy with the Reach RS2 Survey Kit

The Emlid Reach RS2 needs access to corrections for centimeter accuracy. Obtained over the Internet (NTRIP) or a local base station can be used.

NTRIP Corrections

NTRIP (Networked Transport of RTCM via Internet Protocol) allows a GNSS RTK rover (client) to communicate with a GNSS RTK base station (caster) over the internet to achieve cm level accuracy.

Base Stations
A base station is a unitset to a known latitude, longitude and height. This is referred to as a ‘known’ point. This base will keep monitoring the satellites above and will calculate position corrections and send them to the Rover.

An Emlid Reach RS2 is suitable for use as a base station. They are capable of transmitting corrections locally or over the internet. If set up locally, all recorded positions will be relative to the position of the Base Station.

Baseline
When using a RS2 sending corrections over the internet. It is important to note the baseline. The baseline is the term given to the distance between the base station and the GNSS Receiver / RTK Rover (Reach RS2). The baseline is important, because the atmospheric conditions will be different at different locations. Therefore there will be less accuracy the further the rover gets from the base.

Reviews

There are no reviews yet.

Be the first to review “Emlid RCH203-KIT Reach RS2 Survey Kit with Extension Pole”

Your email address will not be published.

You may also like…

Scroll to Top