TW163, 1-to-2 port smart power GNSS signal splitter 10 dB. A professional-grade full GNSS band signal splitter that connects one antenna to two receivers, and supports GPS / QZSS-L1 / L2 / L5, QZSS-L6, GLONASS G1 / G2 / G3, BeiDou-B1 / B2 / B2a / B3, Galileo-E1 / E5a / E5b / E6, NavIC-L5, and L-Band correction services.
Tallysman TW163 1-to-2 Splitter 10 dB Features:
Accepts power from all attached receivers
Automatically switches on power failure of one receiver
Antenna failure detection/indication
Rugged military-grade aluminum enclosure
Amplification to compensate for signal-splitting loss
Very low noise figure
Tallysman TW163 benefits from:
Allows two GNSS receivers to share a single antenna
Fits in-line with antenna cable
Ideal for harsh environments
Tallysman TW163 is a smart power GNSS signal splitter. Accepting power from all connected receivers and selecting the power firstly from port 1 if the voltage is within the specified range. In the event the receiver is absent or disconnected from port 1. TW165 then goes on to select power from port 2 based on whether there is a receiver connected to the port and the voltage range supplied.
In the event an antenna fails, TW165 will provide the receiver supplying power with a current draw of less than 2 mA. Which will indicate a fault to the receiver.
TW163 is supplied with wither TNC or N-type connectors. In addition to this TW163 offers 10 dB gain over signal splitting loss.
Tallysman smart power GNSS signal splitters are essential for avoiding service interruptions