Tallysman TW1722 Embedded GNSS L1 Antenna Pre-filtered

TW1722, Embedded GNSS L1 Antenna Pre-filtered. Emlpoying Tallysman’s Accutenna® technology, TW1722 covers GPS / QZSS L1, GLONASS G1, Galileo E1, Beidou B1 signals and SBAS  (WAAS / EGNOS / MSAS).

Enquire Now

Product Documents

TW1722, Embedded GNSS L1 Antenna Pre-filtered. Emlpoying Tallysman’s Accutenna® technology, TW1722 covers GPS / QZSS L1, GLONASS G1, Galileo E1, Beidou B1 signals and SBAS  (WAAS / EGNOS / MSAS).

TW1722, Embedded GNSS L1 Antenna Pre-filtered Features:
A Compact Dual Feed Patch Element
2 dB bandwidth 1559 – 1606MHz
Very low noise LNA: <1 dB
Axial ratio: 2 dB typ
LNA gain: 28 dB typ
Wide voltage input range: 1.8 to 16 VDC
ESD circuit protection: 15KV
Temperature Compensated Gain

Tallysman TW1722 benefits from:
Great multipath rejection
Increase system accuracy
Improved carrier phase linearity
Excellent signal to noise ratio
Great out of band signal rejection
Compact form factor
RoHS compliant
Reliable performance

TW1722 features a novel 25 mm dual feed wideband patch element, which provides a truly circularly polarized response, with a typical axial ratio of less than 2.0 dB over the full bandwidth.

TW1722 contains a pre-filter to protect against saturation by high-level sub-harmonic and out-of-band signals, such as LTE and WiFi. As well as a two-stage low-noise amplifier (LNA) with a mid-section filter.

Tallysman‘s TW1722 has a built-in 35 mm circular ground plane should ideally be augmented with a local system ground plane or reflecting surface (DC connection not required).

TW1722 is also available in a compact IP67 Housing TW4722 Magnetic GNSS L1 Antenna Pre-filtered.

Reviews

There are no reviews yet.

Be the first to review “Tallysman TW1722 Embedded GNSS L1 Antenna Pre-filtered”

Your email address will not be published. Required fields are marked *

Scroll to Top