Showing 586–600 of 892 results
-
IoT (Internet of Things) / IoT Gateways / IoT Sensors / Thread / Thread / Thread / Thread / Wireless Modules / Wireless Modules / Wireless Networks
Cascoda Thread Evaluation Multi Programmer Kit (EVKPROG)
£15.00 Each INC-VAT (EXW) £15.00Cascoda Thread Evaluation Multi Programmer Kit
-
IoT (Internet of Things) / IoT Gateways / IoT Sensors / Thread / Thread / Thread / Thread / Wireless Modules / Wireless Modules / Wireless Networks
Cascoda Thread Evaluation Kit (EVKHAT4D)
£178.80 Each INC-VAT (EXW) £178.80Cascoda Thread Evaluation Kit with a Raspberry Pi HAT and four Chili2D Modules
-
IoT (Internet of Things) / IoT Gateways / IoT Sensors / Thread / Thread / Thread / Thread / Wireless Modules / Wireless Modules / Wireless Networks
Cascoda Thread Evaluation Kit (EVKHAT2D)
£118.80 Each INC-VAT (EXW) £118.80Cascoda Thread Evaluation Kit (EVKHAT2D) with a Raspberry Pi HAT and two Chili2D Modules
-
Maxtena MEA-3-GLW GNSS/LTE/WIFI Antenna Three-in-one Solution
The Maxtena MEA-3-GLW is a conformal technology solution by Maxtena that combines one LTE antenna, one Wi-Fi antenna and one GNSS antenna.
The Maxtena MEA-3-GLW is ideal for telematics transportation and remote monitoring IOT applications.
The Maxtena MEA-3-GLW is offers a low-profile design with easy mounting and integrated connector of choice.
-
Maxtena MPA-1516 GPS GLONASS Passive Antenna – 25mm
The Maxtena MPA-1516 is designed for embedded applications such as GPS handheld units, mobile devices, and tracking devices.
The Maxtena MPA-1516 higher upper hemisphere efficiency and a lower axial ratio as compared to regular patch antennas.
The interface connector is a through pin solution.
-
Maxtena MPA-1618 Globalstar Passive Antenna – 25mm
The Maxtena MPA-1618 is a high-performance, very low profile antenna designed for embedded applications that use the Globalstar Simplex system.
The Maxtena MPA-1618 antenna™s extreme compact size and lightweight make it perfect for various commercial and industrial appli-cations.
With a typical efficiency of 60% and peak gain of 3.5 dBic the Maxtena MPA-1618 can operate inside the most extreme and demanding applications providing maximum satellite reception and great performance.
-
Maxtena MPA-D254-1621 Iridium Passive Antenna – 25mm
The Maxtena MEA-1621 is designed for Iridium-based embedded applications, and is used in GPS handheld units, mobile devices, and tracking devices.
The Maxtena MEA-1621 features higher upper hemisphere efficiency and a lower axial ratio as compared to regular patch antennas.
The Maxtena MEA-1621 antenna comes standard with a 100 mm cable and U.FL connector, custom alternatives can be requested.
-
Maxtena MEA-1621 External Iridium Certified Passive Antenna – Mag Mount
The MEA-1621 is an external antenna designed for the Iridium Network and is Iridium Certified.
The MEA-1621 provides exceptional pattern control, polarization purity and high efficiency.
The MEA-1621 offers excellent performance at low orbit and a sleek, low profile design with easy mounting, featuring an integrated SMA connector and is rated IP-67 when mounted and unmounted.
-
Maxtena M1559CWT Active Multi-Frequency Antenna – External
The M1559CWT is an active multi-frequency, high accuracy, GNSS antenna for the GPS L1, Galileo E1, Beidou B1 and GLONASS G1.
The M1559CWT radiation pattern, exceptional out-of-band rejection, minimal group delay variation, and low noise figure ensures optimal performance of GNSS systems.
The M1559CWT features a 5 m cable with an integrated SMA, SMB, or MCX connector (customer choice).
-
Maxtena MPA-252 GPS L1 Passive Antenna – 25mm x 2mm
The MPA-252 is an embedded Passive GPS patch antenna designed for applications where an antenna will be hidden within a device.
The MPA-252 is 25 mm x 25 mm x 2 mm and has a through pin connector.
The MPA-252 is available with custom tuning if required.
-
Maxtena MPA-182 GPS L1 Passive Antenna – 18mm x 2mm
“The MPA-182 is an embedded Passive GPS patch antenna designed for applications where an antenna will be hidden within a device.
The MPA-182 is 18 mm x 18 mm x 2 mm and has a through pin connector.
The MPA-182 is available with custom tuning if required.”
-
Maxtena MPA-152 GPS L1 Passive Antenna – 15mm x 2mm
The MPA-152 is an embedded Passive GPS patch antenna designed for applications where an antenna will be hidden within a device.
The MPA-152 is 15 mm x 15 mm x 2 mm and has a through pin connector.
The MPA-152 is available with custom tuning if required.
-
Maxtena MPA-122 GPS L1 Passive Antenna – 12mm x 2mm
The MPA-122 is an embedded Passive GPS patch antenna designed for applications where an antenna will be hidden within a device.
The MPA-122 is 12 mm x 12 mm x 2 mm and has a through pin connector.
The MPA-122 is available with custom tuning if required
-
Maxtena MPA-102 GPS L1 Passive Antenna – 10mm x 2mm
The MPA-102 is an embedded Passive GPS patch antenna designed for applications where an antenna will be hidden within a device.
The MPA-102 is 10 mm x 10 mm x 2 mm and has a through pin connector.
The MPA-102 is available with custom tuning if required.
-
Maxtena M8HCT-A-SMA Active Multi Frequency Helical GNSS Antenna with L5 30dB
M8HCT-A-SMA, active multi frequency helical GNSS antenna with L5 30db. Covering the GPS, Glonass, Galileo and Beidou global navigation satellite systems (GNSS).
Maxtena M8HCT-A-SMA Covers:
GPS L1 L2 L5,
Glonass G1 G2,
Galileo E1 E5B
Beidou B1
