Showing 451–465 of 892 results
-
YIC YIC71513PGMGG Sony GPS QZSS Glonass Ultra Low Power Antenna Receiver Module
Powered by a Sony Chipset, YIC71513PGMGG , is a compact, high performance, ultra low power, standalone multiple GNSS module.
It supports 66 channels and is 15.25 x 13.00 x 6.4mm.
-
YIC YIC71009EBGG Sony GPS QZSS and Glonass Ultra Low Power Receiver Module
Powered by a Sony Chipset, YIC71009EBGG, is a compact, high performance, ultra low power, standalone multiple GNSS module.
It is 10.1 x 9.7 x 2.2mm and supports 66 channels.
-
DINGO LoRaWAN® BACnet® Advanced Gateway / Server (4-Station)
DINGO LoRaWAN BACnet Gateway : LoRaWAN® to BACnet® Advanced Gateway / Server provides a powerful, easy to configure solution for transforming every LoRaWAN device into virtual BACnet® device. (4-Station). – The 4-Station DINGO is now only available to special order – enquire here.
-
BACnet / BACnet / BMS Gateways / Building Automation / IoT (Internet of Things) / IoT Gateways / LoRa / LORA / MBUS / MBUS / Modbus / Modbus / Wireless MBUS / Wireless MBUS
DINGO LoRaWAN® BACnet® Advanced Gateway / Server (3-Station)
From: £977.10 Each INC-VAT (EXW) £977.10DINGO LoRaWAN® BACnet® Gateway : LoRaWAN® to BACnet® Advanced Gateway / Server provides a powerful, easy to configure solution for transforming every LoRaWAN® device into virtual BACnet® device. (3-Station).
-
DINGO LoRaWAN® BACnet® Advanced Gateway / Server (2-Station)
DINGO LoRaWAN BACnet Gateway : LoRaWAN® to BACnet® Advanced Gateway / Server provides a powerful, easy to configure solution for transforming every LoRaWAN device into virtual BACnet® device. (2-Station). – The 2-Station DINGO has been discontinued – Please see DINGO-Lite here.
-
Maxtena MEA-UWB-LTE-90 Ultra Wideband Omni-Directional Antenna
Maxtena’s MEA-UWB-LTE-90 is an ultra wideband omni-directional antenna.
Providing broad coverage (690MHz – 960MHz / 1710MHz – 2700Mhz) as a result it is compatible with most 4G, LTE, 3G and 2G standards.
-
Septentrio AsteRx-m3 Pro+ Dual Antenna Multi Frequency GNSS Receiver
Septentrio AsteRx – m3 Pro+ is a dual antenna multi frequency GNSS Receiver
AsteRx – m3 Pro+ is Septentrio”™s best in class versatile OEM board. A multi frequency, multi constellation GNSS receiver featuring top positioning performance with flexibility to be used either as a base station or a rover receiver. In dual antenna mode it provides heading & pitch or heading & roll information on top of reliable and accurate positioning.
-
Maxtena MEA-2700-UWB-SM 4G LTE Cellular CDMA Antenna
The MEA-2700-LTE is a ultra-rugged broadband 4G LTE antenna featuring a NType connector.
The MEA-2700-LTE is designed to cover the LTE frequency ranges 698-960 MHz| 1710-2700 MHz| 2500-2700 MHz with a nominal gain of 3 dBi.
The MEA-2700-LTE low-profile antenna is designed to provide industry leading wide-band performance and optimal coverage of LTE frequencies, with minimum loss and no tuning required.
-
Septentrio AsteRx-m3 Pro RTK Rover GNSS Receiver
Septentrio”s AsteRx – m3 Pro, a RTK Rover GNSS Receiver.
An ultra low power GNSS receiver for use in a RTK rover, providing some of the lowest power consumption. Delivering a longer operation on a single charge.
-
Septentrio AsteRx-m3 ProBase Base Station RTK GNSS Receiver
Septentrio’s AsteRx-m3 ProBase is a Base Station RTK GNSS Receiver, designed to operate as a base station. In addition to RTK, AsteRx-m3 ProBase is also ideal as part of a wider GNSS network.
-
Calian TW164 1-to-4 Smart GNSS Signal Splitter
Tallysman TW164 1-to-4 Smart GNSS Signal Splitter
The Tallysman TW164 1-to-4 is a signal splitter, In this case it is a 1 to 4 port signal splitter. As a result one antenna can be connected to four receivers.
In addition to this it features Smart Power. Ordinarily, the antenna would be fed from the receiver on Port 1. Otherwise the signal splitter will automatically switch to port 2, 3 and 4.
-
Calian TW162 1-to-2 Smart GNSS Signal Splitter
Tallysman TW162 1-to-2 Smart GNSS Signal Splitter
The Tallysman TW162 is a signal splitter, In this case it is a 1 to 2 port signal splitter. As a result one antenna can be connected to two receivers.
In addition to this it features Smart Power. Ordinarily, the antenna would be fed from the receiver on Port 1. Otherwise the signal splitter will automatically switch to port 2.
The signal splitter is Full GNSS, as a result it supports GPS, QZSS, GLONASS, Beidou and Galileo. In additon to this, it can also support L Band Correction services.
-
YIC G-MOUSE-503 series MediaTek GPS GLONASS Receivers
The YIC G-MOUSE-503 series are MediaTek GPS GLONASS Receivers.
In this case they use the MediaTek MT3333, as a result they are able to track up to 99 channels. In addition to this they also provide a fast time to first fix.
Furthermore the antennas are compact, high performance and low power.
-
YIC G-MOUSE-902 series ublox GPS GLONASS Receivers
The YIC G-MOUSE-902 series are u-blox GPS GLONASS Receivers.
In this case the use the u-blox UBX-M8030-KT as a result they are able to track up to 72 channels. In addition to this they also provide a fast time to first fix.
Furthermore the antennas are compact, high performance and low power.
